Foundations and Trends® in Human–Computer Interaction > Vol 10 > Issue 3–4

Personal Fabrication

Patrick Baudisch, Hasso Plattner Institute, Germany, baudisch@hpi.de Stefanie Mueller, Hasso Plattner Institute, Germany and MIT CSAIL, USA, stefanie.mueller@mit.edu
 
Suggested Citation
Patrick Baudisch and Stefanie Mueller (2017), "Personal Fabrication", Foundations and Trends® in Human–Computer Interaction: Vol. 10: No. 3–4, pp 165-293. http://dx.doi.org/10.1561/1100000055

Published: 08 May 2017
© 2017 P. Baudisch and S. Mueller
 
Subjects
 
Keywords
 

Free Preview:

Article Help

Share

Download article
In this article:
1. Introduction
2. Hardware and Materials
3. Domain Knowledge
4. Visual Feedback and Interactivity
5. Machine-Specific Knowledge
6. Sustainability
7. Intellectual Property
8. Conclusions and Outlook
References

Abstract

While fabrication technologies have been in use in industry for several decades, expiring patents have recently allowed the technology to spill over to technology-enthusiastic “makers”. The big question now is whether the technology will further progress towards consumers, which would allow the technology to scale from hundreds of thousands of users to hundreds of millions of users.

Such a transition would enable consumers to use computing not just to process data, but for physical matter. This holds the promise of democratizing a whole range of fields preoccupied with physical objects, from product design to interior design, to carpentry, and to some areas of mechanical and structural engineering. It would bring massive, disruptive change to these industries and their users.

We analyze similar trends in the history of computing that made the transition from industry to consumers, such as desktop publishing and home video editing, and come to the conclusion that such a transition is likely.

Our analysis, however, also reveals that any transition to consumers first requires a hardware + software system that embodies the skills and expert knowledge that consumers lack: (1) hardware and materials that allow fabricating the intended objects, (2) software that embodies domain knowledge, (3) software that embodies the know-how required to operate the machinery, and (4) software that provides immediate feedback and supports interactive exploration. At the same time, sustained success will only be possible if we also consider future implications, in particular (5) sustainability and (6) intellectual property. We argue that researchers in HCI and computer graphics are well equipped for tackling these six challenges. We survey the already existing work and derive an actionable research agenda.

DOI:10.1561/1100000055
ISBN: 978-1-68083-258-7
143 pp. $95.00
Buy book
 
ISBN: 978-1-68083-259-4
143 pp. $260.00
Buy E-book
Table of contents:
1. Introduction
2. Hardware and Materials
3. Domain Knowledge
4. Visual Feedback and Interactivity
5. Machine-Specific Knowledge
6. Sustainability
7. Intellectual Property
8. Conclusions and Outlook
References

Personal Fabrication

While fabrication technologies have been in use in industry for several decades, expiring patents have recently allowed the technology to spill over to technology-enthusiastic “makers”. The big question now is whether the technology will further progress towards consumers, which would allow the technology to scale from hundreds of thousands of users to hundreds of millions of users. Such a transition would enable consumers to use computing not just to process data, but physical matter. This holds the promise of democratizing a whole range of fields preoccupied with physical objects, from product design to interior design, to carpentry, and some areas of mechanical and structural engineering.

Personal Fabrication analyzes similar trends in the history of computing that made the transition from industry to consumers, such as desktop publishing and home video editing, and comes to the conclusion that such a transition is likely. The analysis also reveals, however, that any transition to consumers first requires a hardware and software system that embodies the skills and expert knowledge that consumers lack. These are: (1) hardware and materials that allow fabricating the intended objects, (2) software that embodies domain knowledge, (3) software that embodies the know-how required to operate the machinery, and (4) software that provides immediate feedback and supports interactive exploration. At the same time, sustained success will only be possible if we also consider future implications, in particular (5) sustainability and (6) intellectual property.

Personal Fabrication argues that researchers in HCI and computer graphics are well equipped to tackle these six challenges. It surveys the already existing work and derives an actionable research agenda. While the main focus is on human-computer interaction and computer graphics, it also includes selected works from adjacent fields such as mechanical engineering, material science, and robotics.

 
HCI-055